Heat Pump Installation in Jasper, AL
A new system here will heat from November through March and cool from May through September every year. Tell us about the house, and a licensed contractor who covers Walker County will get in touch.
Tell us about the job
It takes about a minute.
Jasper asks a heat pump to work most of the year
A heat pump in Jasper works ten months out of the year. Heat from November through March, cooling from May through September. Winter nights average 34°F, so it isn't fighting deep cold, but it still has to keep up night after night for five straight months. Summer afternoons average 90°F, and that heat runs just as long on the other end.
80.6% of homes here heat with electricity, which puts real weight on a heat pump doing its job well in both directions. Any new split-system unit installed today has to meet federal minimums of 14.3 SEER2 for cooling and 7.5 HSPF2 for heating. What matters after that is sizing it and installing it to match what Jasper's winters and summers actually ask of it.
- 5 months
- November through March, your system heats
- 5 months
- May through September, it cools
- 34°F
- the average winter night it heats against
- 90°F
- the average summer afternoon it cools against
NOAA nClimDiv, 1991–2020 normals
Alabama requires HVAC contractors to hold a state license.
The license comes from the Alabama Board of Heating, Air Conditioning & Refrigeration Contractors, and it belongs to the contractor, not the job. The board tested that contractor and keeps a record of them before they ever touch your equipment. It does not mean a specific job was reviewed or signed off on, just that the person doing it is the one on file.
For a heat pump installation, that license is what stands behind the work itself. The part it does not cover is what happens after the equipment goes in. In most cities and counties in Alabama, this kind of installation needs a permit from the local building office and an inspection once it is done, and that inspection is what confirms the work in your home meets code.
Source: Alabama Board of Heating, Air Conditioning and Refrigeration Contractors
- Is a heat pump better than a furnace?
- It depends on what you're weighing. A heat pump moves heat instead of burning fuel to make it, so it handles both heating and cooling from one system, and that covers a home here for all 10 months a year it needs one or the other. A furnace only heats, and winter nights here average 34°F, mild enough that a heat pump can keep up without much trouble. Where a furnace still wins is in homes that want a single dedicated heat source and already have gas run to the house. A contractor can walk through your home's setup and tell you which makes more sense.
- What's the difference between a heat pump and an air conditioner?
- An air conditioner only cools. It moves heat out of your house in summer and that's the whole job. A heat pump does the same thing in summer, then reverses in winter and pulls heat from the outside air into your house instead. That matters here because homes need cooling May through September and heat November through March, so a heat pump covers both seasons with one outdoor unit instead of running separate systems.
- Does a heat pump work in cold weather?
- Yes, and at 34°F, the average winter night here, a heat pump works well. Heat pumps pull heat from outside air even when that air feels cold, and they only start losing capacity once temperatures drop much further than that. New heat pumps sold now also have to meet a federal minimum of 7.5 HSPF2 for heating efficiency, so the equipment on the market is built for real winter use, not just mild days.